Ceiling Coves
Plan the illuminated surface and the recess that conceals the source. Review the strip, housing and access for installation together.
Architecture & Interiors
Architectural Linear Lighting
Bring light into ceiling coves, architectural reveals and continuous contours. Start with the route, the visible light surface and the installation detail, then choose the product format around the space.
Lighting in Context
Let the Architecture Set the Light Path
A recessed light line, an indirect wash and a curved contour ask different things of the lighting assembly. Show both the finished effect and the space behind it.
Visible Lines & Reveals
Define the width and position of the light line as seen from the room. Consider the diffuser, viewing angle and transitions between surfaces.
Curves & Transitions
Mark the intended bend and the emitting face on the drawing. A change in architectural direction must be reviewed against the selected product.
Product Selection
Choose the Product Around the Detail
LED Strip Lights
A separately supplied light source for a planned recess, housing or lighting assembly. Select COB or SMD together with the electrical and visible-light requirements.
Explore LED Strip LightsLED Neon Flex
A flexible lighting product with an integrated LED source. Review the finished light line, bending direction and connection arrangement.
Explore LED Neon FlexCustom Extrusion
A silicone profile developed around a drawing, sample or installation interface when the project needs a specific section.
Explore Custom ExtrusionInstallation Review
Resolve the Section Before Choosing the Light
The required detail depends on the selected product and the finished installation. These are useful starting points for the discussion.
Send Your Drawing- Lighting route
- Show the overall layout, transitions and where each run starts and finishes.
- Recess and interfaces
- Provide a cross-section with the available space, mounting surface and access to the installed assembly.
- Light and bending direction
- Identify the visible face and the permitted bending plane. Do not infer one from the other.
- Power and control
- State the power location, control method and any equipment already selected.
- Installation environment
- Describe exposure, cleaning access and any required product documentation for the project.
Common Questions
Before You Choose
Can one product suit every ceiling detail?
Not automatically. A concealed straight run and a visible curved contour can need different light sources, housings and installation arrangements. Review the actual section before selecting the product.
How do I specify the bending direction?
Include a sketch showing the bend and the light-emitting face. Top-bend and side-bend describe the bending plane, not simply the direction the light faces. The selected model determines its bending limits.
Does a silicone profile include the LED source?
An empty silicone tube or profile does not include the LED light source. LED Neon Flex is a lighting product with an integrated LED source. Specify which format the project requires.
What should I send for an architectural lighting quotation?
Send a lighting layout, recess or profile section, approximate run lengths and required quantity. Include the intended light appearance, installation environment and any power or control equipment already selected.
Can a profile be developed around an existing mounting detail?
Share the mounting section, drawing or physical sample with the available space and connection positions. The profile geometry and assembly can then be reviewed against that interface; compatibility is not assumed from a similar appearance.
Request a Quote
Bring Your Architectural Lighting Detail Into Focus
Send the layout, section sketch and intended lighting effect. We will review the relevant product approach for your installation.