Skip to main content

Black LED Neon Flex

Black LED neon flex uses a dark exterior housing for installations where the unlit profile should integrate with dark architectural surfaces. Housing colour is a selection choice, not one universal electrical specification.

Explore ProfilesRequest a Quote
Black LED Neon Flex catalogue photograph
Family photograph from the AlisterTech International Catalogue. Configuration must be selected separately.

When Should I Choose Black Housing?

Consider black housing when the visible unlit profile should sit discreetly against a dark surface. Review the emitting face and section separately from the exterior colour. The catalogue contains more than one geometry and LED configuration within this family; the same outer dimensions do not make two rows interchangeable. Compare the listed light output, LED type, PCB width and electrical arrangement for the chosen model, and assess the finished appearance with a representative sample.

Compare the Profile Sections

These are representative catalogue sections, not model names created from dimensions. The pictured geometry and the exact electrical configuration are separate parts of selection.

Profiles & LED Configurations

Choose the geometry first, then compare the configuration rows for that profile. Voltage, power, luminous flux and cut length are not interchangeable across variants.

Connect the Profile to the Installation

Dark interior details

Share the installation section, intended viewing position, light appearance and cable route.

Explore the application

Dark display surfaces

Share the installation section, intended viewing position, light appearance and cable route.

Explore the application

Architectural lines

Share the installation section, intended viewing position, light appearance and cable route.

Explore the application

Mounting & End Connections

End caps, cable exits, rigid aluminum profiles and bendable supports are selected around the actual section. Accessory compatibility should be confirmed against the selected profile before quotation.

Use the exact profile and configuration when discussing your project. The International Catalogue contains the complete model rows; accessory documents support a separate fit review.

Custom Profile Development

White silicone profile being checked at extrusion tooling during a production trial
Silicone profile at extrusion tooling during a production trial. This photograph does not establish equipment capacity or a model-specific test result.

From an Existing Profile to a Custom Detail

Start with a catalogue profile when its section fits. If the groove, emitting face, strip space or end interface needs a different geometry, send a drawing, installation sketch or physical sample for custom silicone extrusion review.

New Profile Configurations

Rows of white lighting profiles arranged on an assembly workbench for review

Review the Profile for Your Project

Send the profile size, required light appearance, installation route and quantity. We will review the exact configuration and mounting details.

Request a Quote