Skip to main content

Round & Semi-Round LED Neon Flex

Round and semi-round LED neon flex formats suit decorative light lines and selected suspended forms. A circular outline does not automatically mean 360-degree emission; confirm the pictured section and selected configuration.

Explore ProfilesRequest a Quote
Round & Semi-Round LED Neon Flex catalogue photograph
Family photograph from the AlisterTech International Catalogue. Configuration must be selected separately.

When Should I Choose a Round or Semi-Round Profile?

Choose the section around the sides that must be visible and the available installation space. A semi-round profile can have a defined mounting face, while selected circular formats are intended for a wider emitting angle. Do not infer 360-degree output from diameter alone. Compare each model row for LED type, density, light colour, voltage, power and finished size. Show suspended mounting, end connections and service access where these are part of the project.

Compare the Profile Sections

These are representative catalogue sections, not model names created from dimensions. The pictured geometry and the exact electrical configuration are separate parts of selection.

Profiles & LED Configurations

Choose the geometry first, then compare the configuration rows for that profile. Voltage, power, luminous flux and cut length are not interchangeable across variants.

For round LED neon flex, review the pictured section and the sides that need to remain visible. The 13 x 13 mm profile below lists 24 V single-colour and RGB configurations plus a 12 V Pixel RGB configuration. Round or semi-round shape alone does not establish 360-degree emission, a bending plane or the control interface.

Connect the Profile to the Installation

Decorative architectural lines

Share the installation section, intended viewing position, light appearance and cable route.

Explore the application

Interior light details

Share the installation section, intended viewing position, light appearance and cable route.

Explore the application

Display contours

Share the installation section, intended viewing position, light appearance and cable route.

Explore the application

Mounting & End Connections

End caps, cable exits, rigid aluminum profiles and bendable supports are selected around the actual section. Accessory compatibility should be confirmed against the selected profile before quotation.

Use the exact profile and configuration when discussing your project. The International Catalogue contains the complete model rows; accessory documents support a separate fit review.

Custom Profile Development

White silicone profile being checked at extrusion tooling during a production trial
Silicone profile at extrusion tooling during a production trial. This photograph does not establish equipment capacity or a model-specific test result.

From an Existing Profile to a Custom Detail

Start with a catalogue profile when its section fits. If the groove, emitting face, strip space or end interface needs a different geometry, send a drawing, installation sketch or physical sample for custom silicone extrusion review.

New Profile Configurations

Rows of assembled white linear lighting profiles with cable connectors prepared for review

Review the Profile for Your Project

Send the profile size, required light appearance, installation route and quantity. We will review the exact configuration and mounting details.

Request a Quote