Light Appearance
Show where the finished light will be viewed and whether a diffuser or silicone profile will cover the strip.
LED Strip Lights
COB LED Strips
COB LED strips create a continuous-looking emitting surface. Review the finished light line, board fit and electrical configuration together before choosing a strip.
A Listed 528 LEDs/m COB Strip
One AlisterTech catalogue item lists the following options. These are not specifications for every COB strip or for every possible assembly.
- LED density
- 528 LEDs/m
- PCB width
- 10 mm
- Voltage options
- DC 12 V or DC 24 V
Confirm the selected variant, power arrangement, cut points and connection details before ordering.
12 V or 24 V COB LED Strip?
A 12 V COB LED strip and a 24 V COB LED strip are different electrical variants, not interchangeable supply settings. Start with the voltage of the selected strip, then review its power requirements, planned run and power-feed locations. The AL528 page below covers the listed 24 V option only.
For the listed 12 V option, request a 12 V COB LED strip configuration and include the required length, light colour, control method and installation space. Confirm its own cutting and connection details before ordering.
View the AL528 24 V COB strip →
Review the Complete Light Line
Look at the strip in the intended profile, diffuser or enclosure. The viewing distance and emitting surface affect whether the light line appears even.
A bare strip photograph cannot establish the final appearance or suitability of a connection in a finished assembly.
Compare COB and SMD light appearance →Select the COB Strip Around the Installation
These project details help identify a suitable model and avoid relying on LED density alone.
Electrical Plan
Share the available supply voltage, control method, proposed run and power-feed location for the selected variant.
Board & Connection Fit
Give the available width and depth, cable exit and connector space. Check the actual contact layout and cut end.
COB Strip or a Finished Neon Assembly?
A COB strip is the light source. A finished LED Neon Flex product also includes its surrounding profile and connections. Select the form that matches the installation and the amount of assembly already planned.
What to Send
Share the target light appearance, installation drawing or photograph, voltage and control details, expected quantity and any strip you need to match.
View all LED Strip Lights →Questions About COB LED Strips
Use the selected strip and installation details to confirm the right configuration.
Does 528 LEDs/m describe every COB strip?
No. It is a listed configuration example; other models need their own product data.
Can I choose 12 V or 24 V?
Both options are listed for the example item. Confirm the exact variant and power arrangement for your project.
Will the strip look dot-free after installation?
Check a sample in the intended profile or diffuser from the normal viewing position. The finished appearance depends on the complete assembly.
Can I use any LED strip connector?
No. Check the board width, contact pattern, coating and available connector space for the selected strip.
What should I send for a quotation?
Send the installation dimensions, light appearance, supply plan, expected length and quantity, and any drawing or reference strip.
Find a Strip That Fits Your Installation
Send the lighting effect, available space, supply arrangement and expected quantity. Include a drawing or reference strip if available.