Where will it be viewed?
Show the intended viewing position, desired colour and whether a diffuser or silicone profile will cover the strip. Compare samples in the actual viewing condition when appearance is critical.
COB LED strip · AL528
24V COB LED Strip
For projects that specify a 24 V supply and a continuous-looking light line, AL528 is a 528 LEDs/m COB strip with a 10 mm PCB. Review the strip, diffuser or profile and connection plan together before ordering.
Product Reference
AL528 at a Glance
This page covers the 24 V option of one listed COB strip, not every COB strip or every finished neon assembly. The strip is a light source; the surrounding profile, diffuser, cable and mounting details are selected for the installation.
- Reference
- AL528
- Strip format
- COB LED strip
- Supply option
- DC 24 V
- LED density
- 528 LEDs/m
- PCB width
- 10 mm
Power, colour, cutting interval and connection details depend on the chosen variant and are confirmed in the quotation.
Check the Finished Light Line
COB construction gives the strip a continuous phosphor-covered emitting surface. The final appearance still depends on the viewing distance and on any diffuser, silicone profile or enclosure in front of it.
If you are matching an existing installation, share a photograph of the powered light line as well as the strip or housing dimensions. The photograph helps communicate the visual target; it does not replace the electrical details.
Compare COB and SMD appearance →Installation Review
Choose the Strip Around the Project
A 24 V label and LED density are only a starting point. These three checks help us review whether the requested strip configuration fits the installation.
Will 10 mm fit?
Provide the available width and depth, including clearance for components and the connection end. A nominal 10 mm PCB width alone does not establish that a connector or enclosure will fit.
How is it supplied?
State the available 24 V power supply, proposed run length, feed position and control method. Confirm the selected variant’s electrical limits and wiring arrangement before installation.
Strip or Assembly
Need a Bare Strip or a Finished Light?
AL528 is a standalone COB strip. If the project needs a diffused and protected visible light line, a finished LED Neon Flex assembly may be the better starting point. The choice depends on the mounting route, visible surface and how much assembly is already planned.
What to Send for a Quote
Share the target light appearance, installation drawing or photograph, expected length and quantity, available 24 V supply and any strip or profile you need to match. Include cable exit and control requirements if they are already known.
For a connector recommendation, include a close photograph of the cut-end pads, their polarity marks and the space around the joint. Use the LED strip connector selection guide to describe whether you need a strip-to-wire connection or a joint between strip sections. The listed 10 mm PCB width does not by itself confirm a connector match.
If your supply is 12 V, start with the COB LED strips range and request that variant instead of applying 12 V specifications to AL528. We can review the available information first and confirm the selected configuration.
Send your requirements →Common Questions
Questions About AL528
Is AL528 the same as every 24 V COB LED strip?
No. AL528 identifies this listed 528 LEDs/m, 10 mm PCB option. Other COB strips can have different widths, electrical characteristics and connection layouts.
Does 528 LEDs/m guarantee a dot-free finished light?
No. Review the actual strip with the proposed diffuser or profile at the intended viewing distance. The finished appearance depends on the complete assembly.
Can I use an existing LED strip connector?
Only after checking the selected strip’s PCB width, contact layout, coating and available space at the cut end. A nominal width match by itself does not confirm compatibility.
Is this strip a finished LED neon product?
No. This is a COB LED strip. A finished LED Neon Flex product includes the surrounding profile and requested connection or assembly details.
What if my installation needs a different width or supply?
Send the available dimensions and electrical plan. We can review another strip or an assembled lighting option rather than assuming AL528 fits.
Request a Quote
Review AL528 for Your Installation
Send the light appearance, available space, 24 V supply plan and expected quantity. A photograph or drawing helps us assess fit before confirming the selected variant.