Visible Curve
Show how much of the curved surface should remain visible after installation.
LED Silicone Tube Shape
Domed Silicone Tubes
Domed silicone tube formats use a curved outer surface for lighting details where the visible face sits above or beyond the surrounding installation.
- MOQ from 200 m
- Sample available
- Custom profile available
Profile Overview
Check the Fit Before Choosing Domed Silicone Tubes
Check the base, space for the LED strip and height of the curved face before selecting a domed silicone tube.
Fit the Base to the Installation
Show the groove or mounting surface, plus the width available for the base.
Position the Strip Inside
Compare the internal space with the strip width, component height and any connection.
Check the Curved Light Face
State the allowed projection above the surface and the intended viewing position.
Profile View
Review the Curved Face and Strip Position
Use the profile opening to check the strip position, then review how the curved surface should appear from the intended viewing direction.
Review the base interface, internal strip space and visible projection.
Discuss the intended curved light face from the installed viewing position.
Final light appearance is reviewed with the selected LED strip, silicone profile, assembly and intended viewing position.
Profile & Installation Options
Match the Domed Face, Base and LED Strip
A domed silicone tube is an empty housing with a raised curved visible face. Select the profile together with its strip, mounting interface and end fittings rather than treating the curve as a beam-angle guarantee.
| Profile reference | Outside form | Strip selection | Base & end fittings |
|---|---|---|---|
| K15 | 15 mm nominal domed form | 10 mm PCB reference | Milky-white silicone. Confirm the base and crown height with the section drawing. K15 end caps finish the matching ends. |
The 15 mm reference does not define every height or mounting dimension. Share the mounting slot and full strip height. Use a sample to confirm the assembled appearance; the light source is selected separately.
Selection Check
What to Confirm Before Selecting Domed Silicone Tubes
Use the actual strip, route and surrounding installation to confirm the profile rather than selecting from the outside appearance alone.
Base Interface
Provide the mounting width, groove or housing detail beneath the dome.
LED Strip Fit
Include strip width, component height and the intended position within the profile.
Viewing Position
Identify the main viewing angle so the curved light surface can be reviewed in context.
Route & Bending
Mark the route and bending direction separately from the light direction.
Connections
Show cable exits, end treatment and nearby parts that affect final assembly.
Existing or Custom
Choose the Route That Matches the Installation
Use an Existing Profile
- Match the installation space
- Check the LED strip fit
- Confirm the visible light face
Define a Custom Profile
- Share a sketch or sample
- Identify what needs to change
- Review the profile together
Choose an available domed format when its cross-section, strip space and installation interface match the required assembly. For a domed silicone diffuser, show the mounting base, how far the curved face may project, and the strip position beneath it. Use the strip-position fit guide to describe the section.
A raised curved face is not a measured beam-angle specification. Use the diffusion sample checklist to compare the actual strip and profile from the intended view before ordering.
Use a drawing, sketch or sample when the external form, internal channel, light face or connection detail must change.
Application Review
Connect the Profile to the Installation Scene
Share the viewing position, mounting route and available space so the tube can be reviewed within the actual detail.
Compare Shapes
Other LED Silicone Tube Formats
Questions
Domed Silicone Tubes FAQ
What is a domed silicone tube?
It is a silicone lighting profile identified by its curved or domed visible surface. The selected cross-section still needs to be checked against the LED strip, visible light face and installation.
How do I check LED strip fit for domed silicone tubes?
Provide the strip width, maximum component height, a clear specification or photograph, and any connector or joint that must fit inside the profile.
Can the domed profile be customized?
Custom dimensions and cross-sections are available when an existing profile does not fit the installation. Send a drawing, sketch or physical sample for review.
What is the minimum order quantity?
The minimum order quantity for LED silicone tubes starts from 200 m. Include the estimated quantity and required profile format with the request.
Can I request a sample?
Yes. A sample can be arranged for the selected profile. Sample details and shipping are confirmed with the request; shipping is paid by the recipient.
Request a Quote
Review the domed profile for your installation
Send the LED strip information, available space, light direction, route and estimated quantity already available.