AL-HR11-B24301202820 x 14 mm Top-Emitting LED Neon Flex

AL-HR11-B243012028 offers the 20 x 14 mm section shown below. Select the light colour and exact electrical configuration, then match the mounting route and cable exits to your installation.

Request a Quote Compare Configurations

Profile and dimensions from the AlisterTech International Catalogue. Electrical options are specified separately.

Choose the Section Around Your Installation

20 x 14 mm. Dimensions in mm.

Position the upward-facing light surface within your recess or visible line. Mark the opening and mounting depth so the selected section and end connections can be checked together.

Allow for the LED board, mounting support, cable exit and end treatment, not only the outside size. Emitting direction does not establish a permitted bending plane or minimum bend radius.

LED Configuration Table

Choose the exact AL-HR11-B243012028 configuration for your quote. Voltage, light source, output and cutting interval are row-specific.

Select the Electrical Configuration

All three listed 20 x 14 mm configurations use DC24V and a 12 mm PCB reference. Single-colour and RGB options have a 50 mm cutting interval; the WS2811 Pixel RGB option has a 55.6 mm interval and its own power and controller requirements.

Configuration	LED type	LEDs/m	Colour / CCT	CRI	Cut length	lm/m	PCB	Voltage	W/m	Finished size (mm)	IP
AL-HR11-B243012028	SMD2835	120	White / Red / Blue Green / Yellow	>80/90	50mm	710	12mm	DC24V	14	50002014	IP67
AL-HR11-B24RGB12028	SMD3838	120	RGB	/	50mm	310	12mm	DC24V	14.4	50002014	IP67
AL-HR11-B24RGB10828-2811	WS2811 SMD2835	108	Pixel RGB	/	55.6mm	630	12mm	DC24V	24	50002014	IP67

CRI values and * notation are retained as printed. A slash means no CRI value is supplied for that row. Finished size is not a guaranteed maximum single-feed length; confirm feeds, finished lengths and controls for your project.

Technical reference: International Catalogue page 12, profile 6. Download the source specifications

Mounting, Accessories and End Connections

Mounting and cable-end planning concept — Installation concept; mounting parts and terminations must be matched to the selected profile. AI-generated illustration.

Match the Section and Retention

Show the mounting surface, available width and depth, corners and connection space. A similarly sized cap or bracket is not automatically compatible.

Review accessories

Confirm the Complete Assembly

Identify cable exit, end treatment, supply and controller positions. Select colour control separately from mechanical shape and approve the light line from the intended view.

Technical documents

Applications for This Profile

Linear lighting application concept — Application concept; final light appearance depends on the selected assembly. AI-generated illustration.

Position the upward-facing light surface within your recess or visible line. Mark the opening and mounting depth so the selected section and end connections can be checked together.

Custom Details and Sample Approval

AlisterTech silicone extrusion production detail.

From a Catalogue Section to Your Detail

Start with this profile when its section fits. If the groove, light face or internal clearance must change, send a drawing or sample for custom silicone extrusion. Include segment lengths, colour or animation, connection requirements and quantity.

Review fit, light appearance and connections on a sample before agreeing production.

Frequently Asked Questions

Which configuration should I quote?

Send the full AL-HR11-B243012028 profile reference together with the exact configuration code from the table. The three rows have separate light-source and electrical requirements.

Can I use the same supply for every option?

Use the voltage and power of the selected row. The listed rows use DC24V, but load and control still depend on the chosen configuration.

How do I confirm the mounting and cable exit?

Provide the groove or support dimensions, curve route, cable direction and end space. Match caps and retention parts to the actual section before ordering.

Is this profile suitable for outdoor use?

The listed configurations carry IP67 in the catalogue. Confirm the complete quoted assembly, terminations and exposure. This does not establish suitability for immersion beyond the specified conditions, cleaning jets or every outdoor environment.

Can the profile or finished lengths be customised?

Send a drawing, required lengths, light appearance, controller and quantity. Review a sample for geometry, light effect and connections before agreeing the production configuration.

Discuss AL-HR11-B243012028 for Your Project

Send the selected configuration, route drawing, lengths, mounting details and quantity for a matched quote.

Request a Quote