Signage & outlines
Confirm the installation detail with the selected configuration.
View applicationAlisterTech AL-HR11-B243012002 Side-Emitting LED Neon Flex
AL-HR11-B243012002 references the 4 x 10 mm profile pictured on catalogue page 13, profile 2. Compare its listed LED configurations, then confirm the exact light colour, electrical arrangement and connections for your installation.
What Is AL-HR11-B243012002?
AL-HR11-B243012002 is an AlisterTech reference for the 4 x 10 mm side-emitting led neon flex profile shown in the International Catalogue. The page groups the configuration rows pictured under profile 2 on page 13; each retains its own full AlisterTech configuration code. The side-emitting face should be coordinated with the installation outline. Choose the exact row rather than applying one voltage, power or cut length to every variant.
Profile & Dimensions
| Reference | Profile detail |
|---|---|
| AlisterTech reference | AL-HR11-B243012002 |
| Catalogue source | HR11-B243012002 |
| Profile family | Side-Emitting LED Neon Flex |
| Profile size | 4 x 10 mm |
The reference uses the full catalogue code, not a code derived from profile dimensions.
LED Configuration Table
Each line below is a separate listed LED configuration of the pictured mechanical profile. Include the full configuration code in your enquiry.
| AlisterTech configuration | LED type | LEDs/m | Colour | CRI | Cut length | lm/m | PCB | Voltage | W/m | Finished size (mm) | IP |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AL-HR11-B243012002 | SMD2835 | 120 | White / Red / Blue Green / Yellow | >80/90 | 50mm | 320 | 5mm | DC24V | 10 | 5000*04*10 | IP67 |
| AL-HR11-B24TW28002 | SMD2216 | 280 | 2700-5500K | >90 | 50mm | 400 | 5mm | DC24V | 12 | 5000*04*10 | IP67 |
| AL-HR11-B24RGB12002 | SMD3838 | 120 | RGB | / | 50mm | 177 | 5mm | DC24V | 14.4 | 5000*04*10 | IP67 |
Specifications vary by LED configuration and model. Confirm the final quoted configuration and current technical documentation before ordering. A slash is reproduced where the catalogue does not give a CRI value. The * notation and finished-size values are retained as printed; do not treat the first size value as a maximum single-feed length.
IP67 is listed for these catalogue configurations. Confirm the complete quoted assembly, cable exits and end treatment for the intended exposure; the table is not a separate test report or certification.
Review the Emitting Face & Route
Identify the vertical face that must remain visible, then check the available profile width and height. Show the curve, corners, cable exits and mounting route on your drawing. Choose the electrical and colour configuration from the exact catalogue row, rather than transferring specifications from another section. Emitting direction and bending direction are different decisions: confirm the permitted bending plane and route for the quoted assembly before installation.
What to Show on the Drawing
- Visible emitting face and viewing direction
- Available section width and height
- Curve, corners and mounting route
- Cable exits, power location and control method
- Required length and project quantity
Applications to Review
Architectural curves
Confirm the installation detail with the selected configuration.
View applicationDisplay details
Confirm the installation detail with the selected configuration.
View applicationAccessories & Technical Documents
Accessory compatibility should be confirmed against the selected profile before quotation. Matching dimensions alone do not establish the correct end cap, cable exit or mounting fit.
Use the exact profile and configuration when discussing your project. The International Catalogue contains the complete model rows; accessory documents support a separate fit review.
Manufacturing & Custom Details
From an Existing Profile to a Custom Detail
Start with a catalogue profile when its section fits. If the groove, emitting face, strip space or end interface needs a different geometry, send a drawing, installation sketch or physical sample for custom silicone extrusion review.
Compare Another Profile
AL-HR11-B243012020
10 x 10 mm · Top-Emitting LED Neon Flex
3 catalogue configurations
View profile & configurations
AL-HR11-B243012022
12 x 12 mm · Top-Emitting LED Neon Flex
3 catalogue configurations
View profile & configurations
AL-HR11-B243012003
6 x 12 mm · Side-Emitting LED Neon Flex
3 catalogue configurations
View profile & configurations
Discuss AL-HR11-B243012002 for Your Installation
Send the exact configuration code, section drawing, light appearance and quantity. Include mounting and cable-exit requirements so the complete quotation can be reviewed.